La Marzocco strada ep Operating Manual - page 7
EN
7
• Pressure is displayed through a
pressure gauge with a scale from 0 to
15 bar.
• Safety device, based on an expansion
type
mechanical
valve,
with
counteracting spring adjusted to 13.5
bar.
• Testing: Hydraulic test at 18 bar
performed on ready-to-use small
boilers, at our factory.
• Brewing groups
They consist of a precision casting made
of stainless steel. The brewing group
accepts the portafilter used to hold
the ground coffee; the espresso flows
through the brewing group, through the
portafilter basket, through the portafilter
spout, and into the cup(s) after the
brewing button has been pressed.
• Exterior cover
It consists of a stainless sheet steel
body. The structure has been the object
of specific studies to provide good
aesthetics, lower ergonometric costs for
the operator and reduce the chance of
damage to a minimum.
• Sound pressure
The weighted sound pressure level of the
machine is lower than 70dBA.
• Water pump
There are two type of pump workink on
this model of Strada:
• Rotary vane positive displacement
pump set-up to operate anytime an
electric level gauge whenever the
steam boiler needs to be replenished.
• Magnetic drive gear pump to
operate whenever brewing coffee
following manual or preset pressure
profile from 0 to 12 bar.
THE MOTOR PUMP MUST BE SITUATED
CLOSE TO THE MACHINE IN AN ACCESSIBLE
PLACE FOR MAINTENACE BUT NOT FOR
ACCIDENTAL INTERFERENCE AND WHERE
THERE IS AN OPTIMAL AIR CIRCULATION