La Marzocco strada ep Operating Manual - page 55
EN
55
HOW TO DRAW YOU PRESSURE PROFILES:
1. Install the pressure profile editor.
2. Save all the files that you find into
the USB pen to your pc.
3. Format the USB pen that you will
use for uploading the profiles on
your STRADA.
4. Go to file -> find removable drive ->
found, ok!
5. Choose which is the group where
you want to upload your profiles
6. Choose which is the number of your
profile (curve). max 4 profiles per
group.
7. Choose the numbers of intervals
that you need in order to create your
profile. (min. 2 – max 15).
8. Choose the brewing time (end time)
in order to create your own profile.
(reccomended 25±5 sec.)
9. Start drawing your curve by
changing the position of the interval
points (the first 3 sec. need a
pressure below 4 bar).
10. After you finished 4 profiles of a
group go to file-> save group#nr.
and the editor will automatically
save your profile on the USB pen (if
you need repeat from step 4 to 6 in
order to create other 4 profiles on
another groups).
11. You can upload to your STRADA at
least 1 group.
12. Safe remove the USB pen from your
pc.
13. Plug in the USB pen to your STRADA.
14. Copy from USB->MAChine press
the encoder to confirm.
Remember that by doing this you will
erase the old profiles already uploaded
on your machine. if you want to re-
upload the standard STRADA profiles use
the 3 file .cof that you have found into
the USB pen.
Pressure Profile Editor
Key USB
Copy USB -
MAC
>