La Marzocco strada ep Operating Manual - page 31
EN
31
Display
Operating Procedure
Description
When the espresso machine is turned on, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
Perform group washing.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the operator to
carry out the washing of the coffee groups,
in an automatic way, by running multiple
cleaning cycles.
• To run the cleaning cycle, operate the
brewing lever (part 4, page 5) only once.
“Barista” Programming
Temperatures
programming
117.6
°C 00:00
0.8 B
Cleaning Cycles
1
2
4
5
Rinsing
Groups
Rinsing
Groups
117.6
°C 00:00
0.8 B
3
Coffee Boiler 1
ENABLED
THE STEAM BOILER CONTAINS WATER AT ELEVATED TEMPERATURES. WATER
TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH
FROM SCALDING.
DANGER