La Marzocco strada ep Operating Manual - page 35
EN
35
Display
Operating Procedure
Description
When the espresso machine is turned on, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
If the parameter is not set the espresso machine will be always turn on, move with the Encoder Knob o set the desired
time, press the Encoder Knob to confirm the value and continue with the programming of the other parameters.
Repeat this operation to set the other parameters.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the operator to
program the espresso machine to turn on at
a preset time and turn off at a preset time.
• This feature also allows the espresso
machine to remain in the off condition for
one closed day.
“Barista” Programming
Temperatures
programming
117.6
°C 00:00
0.8 B
Auto ON/OFF
1
2
4
Auto On/Off
On: --.--
Auto On/Off
On: --.--
Auto On/Off
Off: --.--
3
Coffee Boiler 1
ENABLED
5
117.6
°C 00:00
0.8 B
Closed On
------------