La Marzocco strada ep Operating Manual - page 34
EN
34
Display
Operating Procedure
Description
When the espresso machine is turned on, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears..
Press the Encoder Knob until the following display appears.
The first value will blink, use the Encoder Knob to set the clock and continue with the programming of the other
parameters, press the Encoder Knob to confirm the value.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the user to set the
time of day and the day of the week.
• This parameter is used to display time and is
also used by the “Auto On/Off” parameter
• There are 3 changeable values within this
parameter:
•
Hour;
•
Minute;
•
Day of week.
“Barista” Programming
Temperatures
programming
117.6
°C 00:00
0.8 B
Clock Adjust
1
2
3
4
Clock Adjust
00:00 Thursday
Clock adjust.
00:00 Thursday
117.6
°C 00:00
0.8 B
Coffee Boiler 1
ENABLED
5