La Marzocco strada ep Operating Manual - page 51
EN
51
Display
Operating Procedure
Description
While the espresso machine is turned off, press and hold the Encoder Knob. After approximately 10 seconds the
following display appears.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
If the parameter is not set the espresso machine will be always turn on, move with the Encoder Knob o set the desired
time, press the Encoder Knob to confirm the value and continue with the programming of the other parameters.
Repeat this operation to set the other parameters.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the technician to
program the espresso machine to turn on at
a preset time and turn off at a preset time.
• This feature also allows the espresso
machine to remain in the off condition one
closed day.
“Technical” Programming
OFF 00:00
Technical
OFF 00:00
Auto ON/OFF
1
2
4
Auto On/Off
On: --.--
3
Language
ENGLISH
5
OFF 00:00
4
Auto On/Off
On: --.--
Auto On/Off
Off: --.--
Closed on
------------