La Marzocco strada ep Operating Manual - page 43
EN
43
Display
Operating Procedure
Description
When the espresso machine is turned off, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
Move lthe Encoder Knob to select
WITH PUMP 1
,
WITH PUMP 2
or
WITHOUT PUMP
, press the Encoder Knob to
confirm the option.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• The parameter filling WITH PUMP 1 or WITH
PUMP 2 allows the technician to select the
activation of the water pump during the
automatic filling cycle of the service boiler.
• Only under unusual circumstances would
the option of “WITHOUT PUMP” be
chosen.
• The electronics installed in this espresso
machine give priority to the brew boiler for
pressure. The activation of the auto-fill cy-
cle during the brewing process can reduce
the overall dispensing pressure in the brew
boiler.
• During the auto-fill cycle, if a brew cycle is
chosen, the auto-fill cycle is delayed until
all brew cycles are complete.
“Technical” Programming
OFF 00:00
Technical
OFF 00:00
Steam Boiler
1
2
4
Filling-up with
pump 1
Filling-up
with pump 1
3
Language
ENGLISH
5
OFF 00:00
THE STEAM BOILER CONTAINS WATER AT ELEVATED TEMPERATURES. WATER
TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH
FROM SCALDING.
DANGER