La Marzocco strada ep Operating Manual - page 45
EN
45
Display
Operating Procedure
Description
When the espresso machine is turned off, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
Rotate the Encoder Knob to select
WITH PUMP 1
,
WITH PUMP 2
e
WITHOUT PUMP
, press the Encoder Knob to
confirm the option.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the technician to select
the type of the tea brewing WITH PUMP 1,
WITH PUMP 2 or WITHOUT PUMP.
• Only under unusual circumstances would
the option of “WITHOUT PUMP” be
chosen.
• The electronics installed in this espresso
machine give priority to the brew boiler for
pressure. The activation of the auto-fill cy-
cle during the brewing process can reduce
the overall dispensing pressure in the brew
boiler.
• During the auto-fill cycle, if a brew cycle is
chosen, the auto-fill cycle is delayed until
all brew cycles are complete.
“Technical” Programming
OFF 00:00
Technical
OFF 00:00
Tea Brewing
1
2
4
Tea Water
with pump 1
Tea Water
with pump 1
3
Language
ENGLISH
5
OFF 00:00