Maestro e200 series User Manual - page 116
MAESTRO WIRELESS SOLUTIONS |
NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
116
Parameters
Description
Ignore Interface
Check to disable the DHCP interface.
Note
if DHCP is disabled for this interface,
all the LAN devices connected to the
router should have a static LAN IP
configured.
Start
Lowest leased address as offset from the
network address.
Example – if your LAN IP address is 192.168.1.1
and the parameter Start is configured as 100,
then the starting IP Address of the leased IP
Address range is 192.168.1.100
Limit
Maximum number of leased addresses that can
be configured.
Example – if your LAN IP address is 192.168.1.1
and the parameter Start is configured as 100,
and parameter Limit is configured as 150, the
leased IP Address range is 192.168.1.100 to
192.168.1.249. This means a total of 150
devices can be configured.
Leasetime
Remaining time until which the device can use
the DHCP server leased IP Address.
Note
IP address allocated by the router
will disappear from the Wi-Fi /
Overview / Associates stations list
only after individual lease time for
each IP expires.
Table 11.1-23: General Configurations for DHCP Server