Maestro e200 series User Manual - page 209
MAESTRO WIRELESS SOLUTIONS
| SERVICES
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
209
Parameters
Description
Verb
Select the output verbosity level. Higher the
verbosity, higher will be the internal log details.
port
Enter the TCP/UDP port number for local and
remote
Tun_ipv6
Enable the tunnel to handle IPv6 Traffic
server
Enter the IP Address and Subnet Mask for server
mode
Nobind
Check to enable Nobind. Enabling Nobind, does
not allow the binding of local address and port.
Comp_lzo
Select Yes to use fast lzo compression.
keepalive
Server sends the keep alive packets to clients
proto
Select the protocol TCP and UDP.
client
Check to enable the OpenVPN client mode and
disable the OpenVPN server mode.
Note
Only OpenVPN Client mode is supported in
Router Firmware Version Maestro E205
2.0.0 and Maestro E206 2.0.0
client_to_client
Check to facilitate communication between the
Clients connected over the same VPN.
Table 12.7-2: OpenVPN Service Configuration