Maestro e200 series User Manual - page 157
MAESTRO WIRELESS SOLUTIONS
| NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
157
Parameters
Description
Band
Select the Wi-Fi band.
The default band is 2.4GHz (802.11g+n).
HT mode (802.11n)
Select the HT mode for Wi-Fi connection.
Available Options
20 Mhz
40Mhz
Disable
The default HT mode value is 20Mhz
Country Code
Choose the country code corresponding to the
country where the router is operational. This
ensures that the channels available in that
country are enabled. By choosing ‘00’ (World),
the router will select the appropriate channel in
your country.
Distance
Optimization
The operation of a Wi-Fi network can be
optimized, if you know the distance of the
farthest machine in your network from the
router. Value is meter.
Fragmentation
Threshold
Choose Fragmentation threshold value (in
number of bytes). Fine-tuning Fragmentation
Threshold parameter can result in good
throughput but a wrong value can result in low
throughput. The range of values is 256 to 2346
bytes. In a noisy environment, a smaller value of
Fragmentation Threshold may result in more
efficient communication.
RTS/CTS Threshold
You can choose RTS/CTS threshold between 0 to
2347 bytes, typical value being 500. This setting
is for advanced users. It prevents collision of
wireless packets, particularly in case of hidden
nodes or in a noisy environment.
Note
In case of access point setting, it is
recommended not to use RTS/CTS
threshold.
Table 11.3-3: Advance Wireless Connection Configurations for a New Device