Maestro e200 series User Manual - page 81
MAESTRO WIRELESS SOLUTIONS
| NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
81
Note
Access Concentrator name
and Service Name gets auto
populated from PPPoE
Access Point Router if they
are not explicitly provided
PPPoATM
Protocol support is not installed
–
Click Install package “ppp-mod-pppoa” to
install the protocol support.
PPPoA Encapsulation –
Select the
PPPoA encapsulation method; VC-Mux
and LLC.
ATM device number –
Enter the ATM
device number.
The default ATM device number is 0.
ATM Virtual Channel Identifier
(VCI) –
Enter ATM Virtual Channel
Identifier (VCI) number.
The default VCI number is 35.
ATM
Virtual Path Identifier (VPI) –
Enter ATM Virtual Path Identifier (VPI)
number.
The default VPI number is 8.
PAP/CHAP username –
Enter the
PAP/CHAP username.
PaP/CHAP password –
Enter the
PAP/CHAP password.
L2TP
Protocol support is not installed –
Click Install package “xl2tpd” to install
the protocol support.
L2TP Server –
Enter the name of the
L2TP Server.
PAP/CHAP username –
Enter the
PAP/CHAP username.
PaP/CHAP password –
Enter the
PAP/CHAP password.
UMTS/GPRS
Protocol –
Select the protocol with
respect to the router model number.
Service Type –
Select the type of
service from the available:
1. UTMS/GPRS –
The router selects the
best available service.
2. UTMS Only –
The router connects