Maestro e200 series User Manual - page 24
MAESTRO WIRELESS SOLUTIONS |
QUICK SETUP
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
24
Disable
By default, Wi-Fi interface is in enable mode.
Check to disable the Wi-Fi interface if you do not
want to use it.
SSID
Service Set Identifier (SSID) is a sequence of
characters which uniquely names a wireless local
area network (WLAN).
The default SSID is Maestro E200.
Password
The default password is W1rele$$.
Table 8.2-1: Quick Start Network Configuration
8.3
Activating the unit on Verizon network (Maestro E206XT only)
Maestro E206XT supports both 3G and CDMA / Ev-DO network, to activate the
unit on Verizon Wireless network:
Go to the Network > Interfaces tab
Stop
both the
CELLDHCP
and
CELLULAR
interface
Edit
the
CELLULAR
interface, under the priority menu select
Ev-DO
and
click Save & Apply.
The unit will reboot.
Go back to the
Network > Interfaces
tab and
Connect
the
CELLULAR
interface
Edit
the
CELLULAR
interface and
click Activate Verizon Image,
then
Save & Apply
Go back to
Network > Interfaces tab
and
Connect
both
CELLDHCP
and
CELLULAR interfaces.
Go to System > Reboot tab
and reboot your device
Your Maestro E206XT is now connected to the Verizon Wireless network. You can
verify network status under
Status > Overview.