Maestro e200 series User Manual - page 17
Other manuals for e200 series:
Quick Start Manual
Manual is about: cellular/wan/wi-fi
of
220
MAESTRO WIRELESS SOLUTIONS
| UNDERSTANDING THE
MAESTRO ROUTER
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
17
Step6.
Use standard Ethernet cable to connect the existing WAN access to WAN
port of Maestro Router.
Figure 5.4-3: Ethernet cable connection for LAN/WAN access
Step7.
Use standard Ethernet cable to connect “LAN” port with the LAN port of
the computer.
Step8.
Connect the AC power connector into the “DC in” jack on LAN-side panel of
the Maestro Router. Plug the other side of the cord to a standard AC receptacle
and turn the power switch ON. The power LED will light when power is applied.
Figure 5.4-4: Connecting to AC receptacle