Maestro e200 series User Manual - page 172
MAESTRO WIRELESS SOLUTIONS |
NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
172
11.7
Diagnostics
Network > Diagnostics
Screen 11.7-1: Diagnostics Configuration
Parameters
Description
Network Utilies
Ping
IP Address or fully qualified domain name to be
pinged.
It determines network connection between Router and
host on the network. The output shows if the
response was received, packets transmitted and
received, packet loss if any.
Traceroute
IP Address or fully qualified domain name
It determines network connection between Router and
host on the network. The output shows all the routers
through which data packets pass on way to the
destination system from the source system, maximum
hops and Total time taken by the packet to return
measured in milliseconds.
Nslookup
IP Address or fully qualified domain name that needs to be
resolved.
Name lookup is used to query the query the Domain Name
Service for information about domain names and IP
addresses. It sends a domain name query packet to a
configured domain name system (DNS) server. If you enter
a domain name, you get back the IP address to which it
corresponds, and if you enter an IP address, then you get
back the domain name to which it corresponds. In other
words, it reaches out over the Internet to do a DNS lookup
from an authorized name server, and displays the
information in the user understandable format.
Table 11.7-1: Diagnostics Configuration