Maestro e200 series User Manual - page 193
MAESTRO WIRELESS SOLUTIONS
| SERVICES
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
193
Note
If no number is configured than the
router will accept SMS from any number.
Mobile Number
Enter the mobile number.
The format of mobile number must be:
List of Commands
Command name
Command
AT+REBOOT=1
Reboot: reboot the modem
AT+CELLDIAG?
Cell diagnostics: will give you IMEI, CREG, COP,
CSIG
AT+LANDIAG?
LAN diagnostics: Will give LAN IP address,
AT+WANDIAG?
Wired WAN diagnostics:
AT+WANPING=
>
Wired WAN ping: will ping the wired WAN
interface
AT+LANPING=
>
LAN ping: will ping the wired LAN interface
AT+REMACC=
Remote access: will enable; AT+REMACC=
or disable AT+REMACC= remote access
AT+HWI?
Hardware information: will give you hardware
information such as model number
AT+SWI?
Software information: will give you software
information such as firmware version
Table 12.3-1: SMS Service Configurations