Maestro e200 series User Manual - page 79
MAESTRO WIRELESS SOLUTIONS
| NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
79
Parameters
Description
Static address
IPv4 address –
Enter the IPv4 Address.
This IP Address must be used to access
the Router. The default IP Address is
198.162.1.1 for LAN.
IPv4 Netmask –
Select the IPv4
Netmask.
IPv4 Gateway –
Enter the IPv4 Address
for Gateway.
In case of LAN, if you do not provide any
Gateway IP Address, by default it will
take the same IP Address as that of the
IPv4 LAN IP Address (192.168.1.1).
For WAN, enter the IP Address of WAN
gateway.
IPv4 broadcast –
Enter the IPv4
Address for broadcast.
Use Custom DNS servers –
Click
t
o
add custom DNS servers.
IPv6 assignment length –
Select the
IPv6 assignment length.
Available Options
1.
64 –
Assign a part of the given length
of public IPv6-prefix to this interface.
2.
disabled –
3.
--custom--
–
Assign a part of the
given length of public IPv6-prefix to this
interface.
IPv6 assignment length is disabled by
default.
IPv6 address -
Enter the IPv6 Address.
IPv6 gateway -
Enter the IPv6 Address
for Gateway.
IPv6 routed prefix -
Enter the public
prefix direct the client distribution to the
router.
DHCP Server (Only for LAN)
- Provide
static details for configuring DHCP Server.