Maestro e200 series User Manual - page 181
MAESTRO WIRELESS SOLUTIONS
| NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
181
Parameters
Description
Traffic Rules
These rules define policies for traffic communication between the different zones,
primarily used for traffic shaping.
Name
Displays the name of the Traffic Rule.
Match
Displays the details of the Traffic Rule
configuration and the conditions in which the
rule is applicable.
Action
Action to be taken on the traffic when the rule
conditions are satisfied.
Enable
Check to enable the Traffic Rule.
Sort
Click to
sort the configured Traffic Rule.
Open ports on router
Opens the external port to access the Router for various tasks.
By default, all the ports are closed except the available in list of Open ports.
Name
Enter the name of the Open port.
Protocol
Select the Protocol from the available options.
Available Options
TCP –
Allows only TCP traffic to the open
port
UDP –
Allows only UDP traffic to the
open port
TCP+UDP –
Allows both TCP and UDP
traffic to the open port
External port
Enter the Port Number that must be opened.
New forward rule
Name
Enter the name of the Forwarding Rule that will be
used for forwarding traffic between two Firewall
Zones.
Source zone
Select the source firewall zone.
Destination zone
Select the destination firewall zone.
Source NAT
Source NAT is a specific form of masquerading which allows fine grained control
over the Source IP Address used for outgoing traffic.
Name
Displays the name of the Source NAT rule.
Match
Displays the details of the Source NAT Rule
configuration and the conditions in which the
rule is applicable.
Action
Action to be taken on the Source NAT when the