Maestro e200 series User Manual - page 176
MAESTRO WIRELESS SOLUTIONS |
NETWORK
E200 SERIES | USER MANUAL VERSION 1.0
http://support.maestro-wireless.com
176
Parameters
Description
Static IPv4 Routes
Name
Enter the name of the zone.
Input
Select to accept or reject the inbound traffic to
all the configured zone.
Output
Select to accept or reject the outbound traffic
from all the configured zone.
Forward
Select to accept or reject the forwarded traffic
from all the configured zone.
Masquerading
Check to allow IP Masquerading.
MSS clamping
Check to allow MSS clamping.
Covered network
Select the network interfaces that must be
included in the zone configuration.
Inter-Zone Forwarding
Allow forward to
destination zones
Select to allow or deny forwarding traffic to the
configured destination zone.
Allowed forward
from source zones
Select to allow or deny forwarding traffic from
the configured source zone.
Table 11.8-2: General Configuration for Firewall Zone (LAN)