NEC Univerge SV8100 User Manual - Answering Calls
NEC SV8100 Dterm User Guide
12
Answering Calls
Important
answering
points
When answering calls, you may use either of the following
options:
Picking up the handset
Pressing SPEAKER to use speaker phone
Pressing HEADSET key to use headset
To use the speaker option, you must have your MIC key on (will
be red) to be able to talk back to the caller. Just press MIC to turn
on and off.
To end a call you either:
Replace the handset
Press SPEAKER
Press HEADSET
If you are already on a call talking through the handset and you
wish to talk hands free, press the SPEAKER key, then replace the
handset.
Answering
Camped on
Calls
You are already on a call, and your second call key flashes. You
have the option to finish the first call or place them on hold (this
needs to be programmed by a technician).
1.
Advise the first caller they will go on hold.
2.
Press the ANSWER key (first party is automatically on hold)
3.
Talk to the second caller
4.
You may toggle between both callers by just pressing the
flashing call key
Call Pickup
When you hear a phone ringing in your area, you may answer it.
If there is more than one phone ringing, you will answer the first
call waiting.
To pickup a call
1.
Pick up handset (optional), Press P/U on the soft keys or dial *2
Directed
Call Pickup
When you hear a phone ringing in your area, you may answer a
particular extension provided you know the extension number.
To pickup a ringing extension
1.
Press DIR P/U or dial #2
2.
Dial the extension number of the ringing phone