NEC Univerge SV8100 User Manual - Programming 1-Touch Keys
NEC SV8100 Dterm User Guide
21
Programming 1-touch Keys
Extension
numbers
To program extension numbers on1-touch keys
1.
Press # 51
2.
Press the key you wish to program
3.
Press 01
4.
Dial the extension number
5.
Press HOLD
6.
Press SPEAKER
External
numbers
To program external numbers on 1-touch keys
1.
Press # 51
2.
Press the key you wish to program
3.
Press 01
4.
Dial 1 for an outside line followed by the telephone number
5.
Press HOLD
6.
Press SPEAKER
Note:
Check
If you have already programmed a 1-touch key and you wish to re-
program, follow the above instructions - if you wish to delete
programming from a 1-touch key (without re-programming it with
another extn/telephone number):
1.
Press # 51
2.
Press the key you wish to program
3.
Press 00
4.
Press HOLD
5.
Press SPEAKER
To check what is currently programmed on 1-touch keys:
1.
Leave handset down , Press Help key (will then see
CHECK on keyphone screen
2.
Press the 1-touch key that you wish to check programming
on – will see the 1-touch key number displayed on right of
keyphone screen, underneath that will be the programming
on that1-touch key
3.
Press Exit – keyphone screen will return to normal
OR
Press another key you wish to check programming on.