Pacific Communications SmartIP-16PD User Manual - page 12
Part 1 – Introduction
12
1 Panic Recording Button
Pressing Panic Recording
button displays
the icon and commences recording irrespective
of the current schedule.
Press the button again to deactivate Panic
Recording mode.
2 Alarm Button
Pressing the Alarm
button while the alarm
has been activated resets all NVR outputs,
including the built-in buzzer. Pressing the button
while the alarm is off displays the event log on the
screen.
3 PTZ Button
Pressing the PTZ
button initiates PTZ mode,
allowing you to control PTZ cameras.
In PTZ mode, use the arrow buttons to move the
camera up, down, left, and right.
Zoom-In
Zoom-Out
Focus Near
Focus Far
Load preset window
Save current position as a preset
4 Layout Button
Press the Layout
button to cycle through
split screen formats.
Single Screen > 2x2 > 3x3 > 4x4 > 5x5 > 6x6
5 Search Mode Button
Pressing the Search Mode
button initiates
Search mode, which will allow you to search for
and play back video recordings.
Pressing the Search Mode
button while in
Search mode returns the screen to Live mode.
6 Menu Button
Pressing the Menu
button while in Live mode
displays the Live menu.
Pressing the Menu
button while in Search
mode displays the Search menu on the top of the
screen.
Press the button once more to close the menu.
Pressing and holding the Menu
button for
3 seconds while in Playback mode activates One-
Touch mode and displays the clip copy window.
7 Camera Button
Pressing the Camera button while in Live or
Playback mode displays images from the selected
camera in full screen. To select a camera whose
channel is made up of two digits, enter the digits in
sequence using the number keys.
8 Arrow and Playback Control Buttons
These buttons are used to select menus and
options.
Enter (
$)
Button
Used to select options or to
register data entries.
Play/Pause
(
") Buttons
Plays the video in normal speed
and displays
r on the screen.
Press again during playback to
pause the video and display
on the screen.
Setup Menu
(
u/d/l/r) Buttons: Moves the
focus up, down, left, or right.
(
u/d) Buttons: Increases or
decreases values.
Playback
Mode
From paused state:
% Button: To the previous
screen
& Button: To the next screen
Button: Scans backward
through the video at a fast rate.
(press to cycle through x2, x3,
and x4)
! Button: Scans forward
through the video at a fast rate.
(press to cycle through x2, x3,
and x4)