Pacific Communications SmartIP-16PD User Manual - page 49
Part 3 - Configuration
49
Ř Limit Time-Lapse Recording: You can store
event recording data for longer. The limit can be
set as between 1 day and 99 days. If you do not
wish to use Limit Time-Lapse Recording, select
Never. This function is activated when data has
been stored for longer than as configured because
the recording disk has sufficient capacity and saves
new data by overwriting Time Lapse Recording
data that are older than as specified under Recycle
mode.
Ř If the recording stored on the disk is shorter than
the duration specified under Limit Time-Lapse
Recording, the older of Event Recording or
Time Recording data is deleted first.
Ř The system's recording time may change
depending on recording quality, resolution,
motion, and other configurations made by the
user. The duration specified under Limit Time-
Lapse Recording may not be guaranteed in
certain situations.
Ř Recording Failover Service: If the network goes
down, this feature will transfer temporary data
stored in the camera's buffer to the NVR when the
network goes online again.
Ř Use Panic Recording: Enable/disable Panic
Recording.
Ř Panic Recording Duration: Disable Panic
Recording automatically. Select between 5 mins
and 1 hr. If you do not wish to disable the feature
automatically, select No Limit.
Ř Video Profile: Select a recording profile value for
Panic Recording.
Schedule
Disabling Schedule On suspends schedule recording
regardless of the schedule and displays the
icon
on the upper left corner of each camera screen.
Pressing the Panic Record button displays the
icon and commences panic recording.
Set Record Schedule mode as Simple Mode or
Advanced Mode. Advanced Mode allows you to
configure a unique recording schedule for each event.
Select the
icon to delete a schedule.
Ř Changing the recording schedule mode suspends
all active event-linked actions.
Ř Select the + button on the bottom left of the
screen to add a schedule. Select Day to specify
the Day setting or select All. Select Scope to
specify the time frame.