Pacific Communications SmartIP-16PD User Manual - page 69
Part 4 - Search
69
Motion Search
Select Motion Search from the Search menu to bring
up the Motion Search Setup window.
Motion Search cannot be performed while using a split
screen layout. Select Single Screen mode.
Select Option... to configure Motion Search options.
Ř Select First under From and Last under To
to search the recording from start to finish.
Alternatively, you can uncheck the First and Last
options and specify the search time frame manually.
Ř Type: Motion Search looks for motion in the
selected area by comparing individual frames
against their preceding frames. This means slow
and gradual movements, no matter how long
they persist, will not be recognized. In contrast,
Museum Search looks for changes in the specified
area by using the From frame as a reference.
Museum Search, therefore, recognizes even minute
deviations from the original From frame.
Ř The Zone setting can be configured in the identical
manner as the Zone setting under System Setup -
Motion Detection. For more information, refer to the
Motion on page 51.
Museum Search may not function properly if the
edge of the object is included in the Zone. For
more accurate search results, set the inside of the
object's edge as the detection zone.
Ř Sensitivity: Set to between 1 (Low) and 5 (High).
Ř Min. Blocks: The Min. Blocks option is available
with Motion Search only.
Once all the options have been configured, select
Search. Select search results entry to display the
video recording on the left. To play the recording, exit
the setup window by selecting Close.
Text-In Search
Select Text-In Search from the Search menu to bring
up the Text-In Search window.
Select a Transaction to display the video recording
that corresponds to the selected time and date
(paused state).
Text-in information is superimposed on the screen
at normal playback speed. The information is not
shown under any other playback speed.