Pacific Communications SmartIP-16PD User Manual - page 54
Part 3 - Configuration
54
Alarm-In
Ř No.: Enable / disable alarm-ins.
This option includes both local and network camera
alarm-ins. 1 through 16 are network camera alarm-
ins, whereas 17 through 20 are local alarm-ins.
Ř Title: Use the virtual keyboard to enter titles.
Ř Type: Change the alarm-in type.
Ř Actions: Specify which actions to take when Alarm-
In is detected.
- Record: Specify which cameras to begin linked
recording on when an event occurs. If the
schedule is set to Event or Time & Event mode,
the selected cameras will begin linked recording
when an event occurs.
- Alarm-Out: Designate event-triggered alarm-out
channels and beeps.
- Notify: Configure to be notified of events by Mail,
LAN1 through 5, SNS, and/or Alert Window.
- PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
Ř In order to use the Callback feature, the NVR must
be registered on the remote program.
Ř Select Panic Record to specify which alarm-in
channels to use. Panic Record commences when
the corresponding alarm-in occurs and terminates
when the alarm-in is deactivated.
Video Loss
Ř Actions: Specify which actions to take when a
Video Loss event occurs.
- Record: Specify which cameras to begin linked
recording on when an event occurs. If the
schedule is set to Event or Time & Event mode,
the selected cameras will begin linked recording
when an event occurs.
- Alarm-Out: Designate event-triggered alarm-out
channels and beeps.
- Notify: Configure to be notified of events by Mail,
LAN1 through 5, SNS, and/or Alert Window.
- PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
In order to use the Callback feature, the NVR must
be registered on the remote program.
Audio Detection
Ř No.: Select which cameras to apply Audio Detection
to.
Ř Sensitivity: Set to between 1 (Low) and 5 (High).