Pacific Communications SmartIP-16PD User Manual - page 61
Part 3 - Configuration
61
Display Setup
Refer to the Menu Use on page 35 for basic
information on using the Setup menus.
OSD
Show OSD (On Screen Display) information on the
bottom of the screen.
Status
Ř Date and Time: Displays the date and time.
Camera
Ř No.: Displays the camera number on the upper left
corner of the camera screen.
Ř Title: Displays the camera name on the upper left
corner of the camera screen.
Ř Record: Displays recording and schedule icons.
Ř Audio: Displays the
icon on channels
generating audio.
Ř PTZ: Displays the
icon on PTZ cameras.
Ř Text-In: Displays strings received from text-in
devices. Select Display Dwell and specify how
long to display the text-in string. Text-in strings are
shown on the single screen only.
Main Monitor
Configure monitor-related settings.
Ř Mode: Select Full Sequence or Cameo
Sequence.
Ř Interval: Select between 3 secs and 2 mins.
For more information on Sequence, refer to the
Sequence on page 30.
Ř Event Monitoring On: With Event Monitoring
enabled, video feed from the camera configured
to start recording when an event occurs is shown
on the screen. For more information on Event
Monitoring, refer to the Event Monitoring on page
32.
Ř Resolution: Select 1920 x 1200, 1920 x 1080,
1680 x 1050, 1600 x 1200.
s Supported resolutions may be restricted
depending on the monitor.
s We recommend that you use 1920 x 1080
resolution.