Pacific Communications SmartIP-16PD User Manual - page 26
Part 2 - Getting Started
26
5
Select a camera from the scan list and then
select Add Camera. The device login window will
appear.
6
Enter a User ID and a Password for the selected
camera.
The camera connected to Video In port should
be set to IP band 169.254.x.y and subnetmask
255.255.0.0. When selecting other cameras, set
the camera IP to 169.254.x.y band and connect
the NVR.
Camera View Buttons
Ř ALIGNMENT
Button: Realigns camera screens
displayed on the video display area in the order of
Video In port connections.
Ř RESET
Button: Refreshes the video display area
and the camera list.
Selecting RESET clears all scanned devices from
the list.
Ř TOOL Button: The network camera tools
window appears and you will be able to change the
camera protocol.
The camera protocol has to be set to DirectIP
to register in NVR. Select the camera Protocol
displayed by SiRiS to set DirectIP.
Changing the protocol restarts the camera and
registers the camera to NVR to use it. For more
information on settings, refer to the network
camera's user manual.
Camera List Area
1
2
3
4
Registered
Screen
No display
Screen
display
Initial registration
Initial registration
other NVRs
(Registration X)
other NVRs
(Registration X)
1 Screen Position/Registration Status: Identifies
the camera's position in the video display area.
A blue background indicates a camera that is
available for registration. A grey background
indicates an already registered camera.
Other registered cameras are shown in black
background.
2 Model: Indicates the camera's model.
3 MAC: Displays the last 6 digits of the camera's
MAC address.
4 Title: Indicates the camera's name. Changing a
camera's name in the video display area updates
the camera list as well.
Following options can be accessed by right-clicking
on a camera list entry:
Ř Add Camera: Adds the selected camera. This
option is inactive if the camera has already been
added to the screen.
Ř Authentication: Enter the necessary camera login
info. This option is inactive for DirectIP™ cameras
because they do not require logins.
Ř Enable Preview: Displays a preview of the feed
from the selected camera.