Pacific Communications SmartIP-16PD User Manual - page 63
Part 3 - Configuration
63
Storage
Indicates each disk's status.
Configure Disk Bad and Disk Temperature settings under Setup > System > Monitoring.
Disk Bad
Not Formatted
A disk that has never been used before.
Good
Ř Disk performing normally.
Ř If the HDD is partially damaged, indicates the bad sector
percentage.
Error
Ř If the HDD's bad sector ratio is higher than as designated by
the user.
Ř Generates a system event.
Temperature
N/A
Unable to detect the disk's temperature.
Good
Operating within normal temperature range.
Bad
Ř Disk temperature higher than as designated by the user.
Ř Generates a system event.
S.M.A.R.T.
N/A
A disk that does not support S.M.A.R.T.
Good
A disk with normal S.M.A.R.T. status.
Bad
A disk with abnormal S.M.A.R.T. status. Possibility of damage
within 24 hours.
Check each disk's data storage time information under Recording Data.