Pacific Communications SmartIP-16PD User Manual - page 60

Part 3 - Configuration

60

The event recordings generated by a camera can 

be attached only. Select the MP4 Clip option at the 

bottom to attach .mp4 video clips.

SMTP Setup

Select SMTP Setup at the bottom right corner of the 

screen to configure an SMTP server.

1 

Select the SMTP server Type.

2 

Enter the SMTP Server's IP address or domain 

name and then configure the Port and Sender 

settings.

Default SMTP server port number is 25. Select Test to 

send out a test mail using the current settings. Select 

Use SSL/TLS to use an SMTP server that requires 

SSL connections.

Ř If you have configured the DNS Server setting 

under Network - IP Address, you can enter 

the STMP server's domain name instead of its IP 

address in the SMTP Server field.

Ř Address entered under Sender must be in the 

correct email format and include the @ symbol.

If user authentication is required by the SMTP server, 

select Use and then enter the User and Password 

information.

3 

Select OK to apply and exit.

This product contains content developed by 

OpenSSL Project for use in Open SSL Toolkit (http://

www.openssl.org/).

SNS

This option enables the NVR to send out SNS 

messages.

The SNS (Social Network Service) feature sends 

out event-related messages to designated Twitter 

accounts. Select the + icon at the bottom left corner 

of the screen to add an SNS account. Select the 

icon on the right side of the list to remove the SNS 

account.

Enter the User Name and Password information.

Messages may not be transmitted successfully due 

to limitations in Twitter's services.