Pacific Communications SmartIP-16PD User Manual - page 59
Part 3 - Configuration
59
s Status: Used to check the status of the device
being registered to the FEN server.
Select Save after making changes to register the
NVR's name to the FEN server.
If FEN has been configured correctly, the FEN
server's help desk information will be displayed in the
Help Desk field the next time you access the FEN
Setup screen.
Notification Setup
Schedule
Select the + icon at the lower left corner of the screen
to add a notification schedule.
Ř Day: Add different schedules for different days of
the week.
Ř Range: Change the event notification time frame.
Ř Notify: Select which notifications to generate when
an event occurs. Select Mail, LAN 1 through 5,
SNS, and/or Alert Window.
s In order to use the Notification (Callback) feature,
the NVR must be registered on the remote
program.
s Select the
icon to delete the existing schedule.
Ř Summary Email Interval: Transmit event summary
emails to a remote destination at specified intervals.
Callback
Configure Callback settings.
Enter the IP address of the receiving server and set
Retry to between 1 and 10 in case of connection
failure.
Configure Mail settings.
Select the + icon at the bottom left corner of the
screen to add a mail account.
Select Recipient and then enter the mail address and
server information.
The recipient's mail address must be in the correct
email format and contain the @ symbol.
Select the
icon to attach event recordings to
outgoing mails.
Select the
icon to remove the account.
Select MP4 Clip to attach event recordings to
outgoing mails.