Pacific Communications SmartIP-16PD User Manual - page 42
Part 3 - Configuration
42
Camera Setup
Refer to the Menu Use on page 35 for basic
information on using the Setup menus.
General
Enable/disable and rename cameras.
Ř Title: Edit the camera's name.
Ř Use: Set the camera as Normal, Covert 1, or
Covert 2.
Live images and video recordings from cameras that
have been set as Covert 1 or Covert 2 will not be
available to users who do not have covert camera
access. Setting a camera as Covert 1 hides its
images but does display OSD information about
the camera. Setting a camera as Covert 2 hides
its images as well as ODS information about the
camera as if it has been deactivated completely.
Advanced Setup
Configure security and other advanced camera
settings.
Ř Video: Adjust the camera image sensor settings
such as white balance and exposure.
Ř Privacy Masking: Enable/disable and configure
privacy masking for the camera.
Ř PTZ: If using an RS485-compliant camera,
configure it for use in PTZ Mode.
– PTZ Product: Choose to select the model of
installed PTZ device.
– ID: Choose to assign an ID to each PTZ device.
– Choose to set up Baud Rate, Data Bit, Stop
Bit and Parity of the connected device.
Refer to the PTZ device manufacturer’s instructions
for the proper settings.