Pacific Communications SmartIP-16PD User Manual - page 70
Part 4 - Search
70
Select Option... to configure Text-In Search options.
Ř Select First under From and Last under To
to search the recording from start to finish.
Alternatively, you can uncheck the First and Last
options and specify the search time frame manually.
Ř Channel: Select a channel.
Ř Select Text-In Device to select a device type.
Ř + Button: Add a search variable.
Ř Case Sensitive: Configure case sensitivity.
Ř Import: Retrieve stored search option settings.
Ř Save: Save the current search option settings.
Once all the options have been configured, select
Search to begin the search and return to the Text-In
Search setup window.
Clip Copy
Clip Copy
Select Export – Clip Copy from the Search menu or
press the remote control's CLIP COPY button while
in Live or Playback mode to open up the Clip Copy
setup window. Specify the From and To settings.
A-B Clip Copy
Designate a start point and an end point and copy
the data in between. Select Export – A-B Clip Copy
from the Search menu to set point A. The
icon
will appear on the status indicator area on the upper
right corner of the screen. Select Export – A-B
Clip Copy once again to set point B. The Clip Copy
Setup window will appear. Select A and B points are
automatically applied as From and To values.
Ř Channels: Specify which channel to save the
recording to.
Ř Password: Enable password protection for the
saved video clip and assign a password.
Ř Dest.: Select which storage media to use.
Ř File name: Designate a name for the file. The name
may be up to 63 characters in length.
Special characters such as \, /, :, ;, *, ?, !, “, <, >,
and | are not permitted.
Ř Include Text-In Data: Enabling this option will save
the video clip along with any available text-in data.
Ř Use Site Info: Adds location info to the Clip Copy
file's name.
Special characters contained in the location info
(such as \, /, :, ;, *, ?, !, “, <, >, and |) will be replaced
with _ when the information is added to the file
name.
Selecting Start displays a calculation on the size of
the data to be copied. Check the calculation and
then select Continue to proceed. While Clip Copy
is in progress, you can select Cancel to cancel the
process or select Close to allow the window to run
in the background. Selecting Close does not cancel
Clip Copy. Once the process is complete, you will be
prompted with a confirmation window.