Pacific Communications SmartIP-16PD User Manual - page 29
Part 2 - Getting Started
29
Live Mode
Live Menu
Press the Setup button while in Live mode to bring up the Live menu on the top of the screen. Press Setup once
more to hide the menu. Use the Arrow buttons on the front panel of the NVR or the remote control to select the
menu options.
1
2
3
4
5 6 7 8
9 0
! @
#
1
Login/Logout
2
Layout
3
Previous Group,
Next Group
4
Display
5
Freeze
6
Alarm
7
Panic Recording
8
Sequence
9
Select Camera
0
Search Mode
!
Setup
@
Wizard
#
Status Indication
Placing the mouse pointer near the top portion of the screen also displays the Live menu.
1 Login/Logout
Log into and out from accounts. If in the logged in
state, the account ID is shown. If in the logged out
state, the login icon is shown.
2 Layout
Used to change the screen layout to single screen,
2x2, 3x3, 4x4, 5x5, or 6x6.
3 Previous/Next Group
Loads the previous/next screen group.
4 Display
Ř OSD (On Screen Display): Enables/disables the
OSD feature.
Ř Full: Displays the video in full screen mode.
Ř Aspect Ratio: Select whether to enable the
original aspect ratio of video transmitted from the
camera.
5 Freeze
Freezes the screen. Select Freeze again to
unfreeze.
6 Alarm
Pressing this button while the alarm has been
activated resets all NVR outputs, including the built-
in buzzer.
7 Panic Recording
Activates/deactivates Panic Recording.
8 Sequence
Initiates Sequence in the same manner as pressing
the SEQUENCE button while in Live mode. To
exit, select Sequence once more or press the
SEQUENCE button on the remote control. The
icon is displayed on the upper right part of the
screen while Sequence is in progress.