Pacific Communications SmartIP-16PD User Manual - page 37
Part 3 - Configuration
37
Ř Clear All Data: Erases all recording data. Selecting
Clear All Data displays a confirmation window.
Select Clear to proceed.
Ř Before you perform Clear All Data, make sure
you are not accidentally deleting important data.
Erased data cannot be recovered.
Ř Clear All Data does not affect the system log.
Instead, the Clear All Data event will be added
to the log.
Ř System Shutdown: Shuts down the system. When
prompted, select System Shutdown
Date/Time
Ř Date: Used to change the system's date setting.
Ř Time: Used to change the system's time setting.
Ř Date Format/Time Format: Used to change the
system's date and time formats.
Ř Time Zone: Used to designate the system's time
zone.
Refer to the map displayed on the screen and
change the time zone using the mouse or the arrow
buttons.
Ř Use Daylight Saving Time: Enables DST
correction.
Ř Time Sync.: Select a time server for the system to
synchronize with.
1
Select Automatic Sync.
2
Enter the Time Server's IP address or domain
name or select and then choose a server from
the list of registered time servers.
3
Specify the server synchronization Interval.
4
Select OK to apply and exit.
Ř If you have configured the DNS Server setting
under Network - IP Address, you can enter
the time server's domain name instead of its IP
address.
Ř Selecting Run as Server sets the current NVR as
a time server for other NVRs within the system.
Ř Holiday: Designate holidays. On specified
holidays, recording takes place according to the
holiday recording schedule specified under Record
Schedule.
1
Select the + button at the bottom of the window.
2
Select a date.
3
Select OK to apply and exit.
Select the
icon to delete the existing holiday date.