Pacific Communications SmartIP-16PD User Manual - page 28
Part 2 - Getting Started
28
Camera Registration Mode
While in Live mode, right-click and select Camera
Registration.
If Auto Detection has been enabled, a message will
appear while in Live mode when a new camera is
detected.
Select OK to enter Camera Registration mode.
Auto Detection should be disabled if no more
camera connections are expected.
Login
Configuring the NVR's settings and accessing its
searching and other functions require an authorized
user login.
1
Bring up the Live menu and either press the
SETUP button on the remote control or click on
(Login) using the mouse.
2
Select a user, enter the password, and then select
OK.
s There is no default password for the admin
account. Select admin and then OK without
entering a password to log in.
s Leaving the admin account unassigned
with a password poses a security risk.
Please assign a password at your earliest
convenience. A warning message will
continue to be displayed until a password is
assigned.
s Click on the
button next to the password
field using the mouse. This will bring up a
virtual keyboard you can use to assign a
password. For more information on using the
virtual keyboard, refer to the Text Input via
Virtual Keyboard on page 35.
3
To log out, bring up the Live menu and click on
(Log out) using the mouse.