Xerox 4595 System Administration Manual - page 101

Xerox 4595 Copier/Printer System Administration Guide

5-11

5. Using the Scan Service

g. Select 

Save

.

h. Configure 

TCP/IP - Subnet Mask

 and 

TCP/IP - Gateway 

Address

 as shown above.

NOTE 1: Enter address in the format “xxx.xxx.xxx.xxx” 

where xxx should be a numeric value in the range from 0 

to 255. However, 224 or 225.xxx.xxx.xxx and 

127.xxx.xxx.xxx cannot be used.

NOTE 2: Specify the subnet mask by a combination of the 

numbers 0, 128, 192, 224, 248, 252, and 255. However, 

you cannot use 0 between non-zero values.

NOTE 3: If you do not wish to set the gateway address, 

enter “0.0.0.0.”

5.

Select 

Close

 repeatedly until the 

System Settings

 screen is 

displayed.

6.

Select 

Exit

.

7.

After the machine is restarted, print out the Printer Settings 

List to confirm that the salutation port is enabled and the IP 

addresses are configured.