Xerox 4595 System Administration Manual - page 365
Xerox 4595 Copier/Printer System Administration Guide
9-5
9. Troubleshooting
changed, queries and cancel processes from the machine will
not be performed correctly. Switch the machine off and on
when there is no print data in the receiving buffer.
NOTE: Canceling print jobs or forcing the machine to print the
remaining jobs in the receiving buffer can be operated from the
control panel on the machine. For information, refer to the User
Guide, Chapter 2, the section entitled “Job Status.”
•
When the machine is off-line.
If a computer instructs a print job while the machine is off-line,
the machine will not receive the data and a write error dialog
will be displayed on the computer. However, when using SMB
the print data can be received from a computer while the
machine is off-line.
•
Deleting jobs.
For Windows NT 4.0, jobs can be deleted if Service Pack 4 or
later is installed. A write error will be displayed if the job is
deleted while it is being received. In this case,
Retry
displayed
on the error dialog is of no use.