Xerox 4595 System Administration Manual - page 64

Xerox 4595 Copier/Printer System Administration Guide

3-16

3. Using CentreWare Internet Services

SNMP

This section describes the settings for SNMP.

NOTE: When using the CentreWare software to manage the 

machine by remote control, enable the SNMP port.

1.

Start a web browser.

2.

Type the IP address or the Internet address for the machine in 

the address bar on the browser, and press the 

Enter

 key.

•

Example of the IP address entry:

http://192.168.1.1/

•

Example of the Internet address entry:

http://xxx.yyyy.zz.vvv/

NOTE: When specifying a port number, add ":" and a port 

number to the end of the Internet address.

3.

Click the 

Properties

 tab.

4.

Click 

+

 on the left of 

Protocol Settings

 to display the items in 

the folder.

5.

Click 

SNMP

.

6.

When changing the community name, set all the 

Community 

Name (Read only)

, 

Community Name (Read/Write)

, and 

Community Name (Trap Notification)

.

NOTE: Normally, do not change the settings.