Xerox 4595 System Administration Manual - page 92

Xerox 4595 Copier/Printer System Administration Guide

5-2

5. Using the Scan Service

Configuration of the scanner (mail transmission)

Preparations

Prepare the following to use the scanner (mail transmission) 

function:

•

A registered mail account

A mail account for the machine needs to be registered.

Overview

This section describes the configuration procedure to use the 

scanner (mail transmission) function on the machine.

The following is the procedure to use the scanner (mail 

transmission) function:

•

Enabling the port and setting TCP/IP

Enable the mail send port and mail receive port, and set IP 

addresses on the machine.

•

Configuring the E-mail Environment

Set the e-mail function items on the machine.

Enabling the ports and setting the IP addresses

This section describes the configuration procedure to use TCP/IP 

on the machine.

First enable the mail send port, then set IP address on the 

machine.

NOTE 1: The configuration can also be performed using 

CentreWare Internet Services.

NOTE 2: Enable the SOAP port and the SNMP port in most cases.

Refer to “Using CentreWare Internet Services” on page 3-1.

1.

Display the 

System Administrator Menu

 screen.

a. Press the 

Log In/Out

 button.

b. Enter the UserID using the numeric keypad and then 

select 

Confirm

.

NOTE: The default User ID value is 11111. When using the 

Authentication feature, a password is required. The default 

password is x-admin.

c. Select 

System Settings

.