Xerox 4595 System Administration Manual - page 63
Xerox 4595 Copier/Printer System Administration Guide
3-15
3. Using CentreWare Internet Services
LPD
This section describes the settings available for the LPD feature.
1.
Start a web browser.
2.
Type the IP address or the Internet address for the machine in
the address bar on the browser, and press the
Enter
key.
•
Example of the IP address entry:
http://192.168.1.1/
•
Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
3.
Click the
Properties
tab.
4.
Click
+
on the left of
Protocol Settings
to display the items in
the folder.
5.
Click
LPD
.
6.
Set the
Port Number
.
7.
Select the
Enable
check box to enable the
TBCP Filter
.
8.
Set the
Connection Time-Out
.
9.
Reflect the values as the machine’s setting values.
a. Click the
Apply New Settings
. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name
and
Password
, and then click
OK
.
NOTE: The default User ID value is 11111 and password is x-
admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click
Reboot
. The machine will reboot and the setting
value will be reflected.