Xerox 4595 System Administration Manual - page 263

Xerox 4595 Copier/Printer System Administration Guide

8-105

8. Setups

Use the following procedure to select a default fine tune setting.

1.

Select 

Fine-tune 100%

, and select 

Change Settings

. 

2.

Enter the desired fine-tune value by using 

s

, 

t

, 

W

, and 

X

.

3.

Select 

Save

 to save the changes and return to the 

Copy 

Control

 screen.

Pseudo-Photo Gradation

Mode

Select the default toning method for photo originals. To obtain an 

image quality that is closer to the photo image, select how gray 

tones will be handled by the machine. Select either 

Error 

Diffusion

 or 

Dither

.

Original Type - Lightweight

Originals

Select the default setting for light weight originals. The selection 

made here is displayed on the 

Image Quality

 screen, 

Original 

Type

 feature. Select either 

Enabled

 or 

Disabled

.

Output Orientation-Reverse

Order

Select whether or not 

Reverse Order

 is enabled for the delivery of 

the copy or print output. If 

Enabled

 is selected, 

Face Up

, 

Reverse Order

 is displayed on the 

Output Orientation

 screen 

(

Output Format

 tab).

Output Orientation-Auto

(Single sheet)

Select the default setting for delivering the copy or print 

output. This default setting is displayed on the 

Output 

Orientation

 screen (

Output Format

 tab). Select either 

Face Up

or 

Face Down

. The setting selected here is the default delivery 

method when the 

Auto

 feature is selected on the Output 

Orientation

 screen (

Output Format

 tab).

Stamp Density

Select the default translucency/density of the stamp when it is 

printed out the copy/print output. Select from three translucency 

values: 

0%

 (solid), 

25%

, or 

50%

.

NOTE: Selecting the 0% value represents no translucency 

(transparency); therefore, any text that resides underneath the 

stamp may not be readable on the output.