4RF Aprisa XE User Manual - page 104
Other manuals for Aprisa XE:
User Manual
Manual is about: 4RF Aprisa XE fixed point-to-point digital radio link
of
182
102 | Configuring the Traffic Interfaces
Aprisa XE User Manual
QJET Port Settings
1. Select Link or Local or Remote > Interface > Interface Summary, then select the QJET interface and
click Configure Interface.
2. Select the QJET port to be configured and click Edit.
3. Set the QJET Line Encoding:
For an E1 port, set the E1 Line Encoding as required to either HDB3 or AMI. The default is HDB3.
For a T1 port, set the T1 Line Encoding as required to either B8ZS or AMI. The default is B8ZS.