4RF Aprisa XE User Manual - page 40
38 | Mounting and Installing the Terminal
Aprisa XE User Manual
DC Power Input Cabling
The DC power input is terminated on the front panel of the terminal with two high-current M3 screw
clamps for the positive and negative DC input and a M5 stud for the earth connection.
The DC power cables have pre-terminated lugs to fit into the power input M3 screw clamps on one end and
bare wire at the other end.
The appropriate power cable for the power supply ordered is included in the accessory kit.
12 VDC LP / 24 VDC / 48 VDC Cable
The 12 VDC LP, 24 VDC and 48 VDC power supplies are supplied with a 3 metre red / black cable of
2.0 mm
2
(23 strands of 0.32 mm
2
).
Terminal
Power input
Cable colour
+V
Positive DC input
Red
-V
Negative DC input
Black