4RF Aprisa XE User Manual - page 136
Other manuals for Aprisa XE:
User Manual
Manual is about: 4RF Aprisa XE fixed point-to-point digital radio link
of
182
134 | Configuring the Traffic Interfaces
Aprisa XE User Manual
4. Set the HSS DCD Mode as required.
The DCD mode controls the state of the outgoing interface DCD control line.
This setting is only relevant if the HSS interface is DCE.
5. Enable or disable the HSS XTxC control, as required.
Depending on the clocking mode (see ‘HSS Handshaking and Clocking’ on page 135) selected, altering
this setting will allow the terminal clock to be substituted for the external XTxC signal.
6. Click Apply to apply changes or Reset to restore the previous configuration.