4RF Aprisa XE User Manual - page 42
40 | Mounting and Installing the Terminal
Aprisa XE User Manual
AC Power Supply
There is one AC power supply for the terminal. This AC power supply is auto-sensing to operate with a
nominal input voltage of 115 Vrms or 230 Vrms.
The power input is terminated on the front panel of the terminal using a standard IEC plug. This power
supply has a power on/off switch.
A power cable is included in the accessory kit and is pre-fitted with an IEC socket connector and the
country-specific plug that was specified when the order was placed.
Nominal
voltage
Input voltage
range
Maximum Power
input
Max VA
Frequency
115 VAC
103 - 127 Vrms
180 W
400 VA
47 - 63 Hz
230 VAC
207 - 254 Vrms
180 W
400 VA
47 - 63 Hz
Terminal
Power input
Cable colour
E
Earth
Green/yellow
N
Neutral
Blue
L
Line / Phase
Brown
Important: Please check with your local power authority about correct colour usage and pinouts.
AC power cords used must be in accordance with national requirements.
Norway and Sweden: PLUGGABLE CLASS I EQUIPMENT intended for connection to a telephone network or
similar communications system requires a label stating that the equipment must be connected to an
earthed mains socket outlet.