4RF Aprisa XE User Manual - page 130
Other manuals for Aprisa XE:
User Manual
Manual is about: 4RF Aprisa XE fixed point-to-point digital radio link
of
182
128 | Configuring the Traffic Interfaces
Aprisa XE User Manual
QV24 Serial Interface Card
There are two modes of operation of the QV24 Serial Interface Card; QV24 asynchronous and QV24S
synchronous. The mode is changed with the Slot Summary.
Changing the QV24 mode changes all four ports on the interface card.
To change the QV24 mode:
1. Select Link or Local or Remote > Interface > Slot Summary, then select the QV24 interface slot and
click Configure Slot.
2. Select the QV24 mode required with Expected.
3. Select the QV24 mode required with Change Type To and click Apply.
4. Reboot the terminal with a Hard Reboot (see ‘Rebooting the Terminal’ on page 233).