4RF Aprisa XE User Manual - page 106
Other manuals for Aprisa XE:
User Manual
Manual is about: 4RF Aprisa XE fixed point-to-point digital radio link
of
182
104 | Configuring the Traffic Interfaces
Aprisa XE User Manual
Q4EM Port Settings
1. Select Link or Local or Remote > Interface > Interface Summary, select the Q4EM interface, and click
Configure Interface.
2. Select the Q4EM port to be configured, and click Edit.
'Slot' shows the slot the Q4EM interface card is plugged into in the terminal (A – H).
'Port' shows the interface port number (1-4).
‘PCM Mode’ shows the current mode assigned to the port by the cross connect.
‘E&M’ shows if the E&M signalling on the port has been activated by the cross connect.
‘Loopback’ controls the 4 wire analogue port loopbacks.