4RF Aprisa XE User Manual - page 175
Cross Connections | 173
QV24S Cross Connections
Synchronous Mode
1. Expand the QV24S displays, as required, by clicking the relevant icons.
2. Select the Port Baud Rate as required (default is 9600).
3. Drag and drop to the required partner interface to create the V.24 Data connection.
If the partner interface is a QJET, drag from the QV24S mapping connection box to the QJET timeslot.
The correct QJET capacity for the baud rate selected will automatically be assigned.
Baud Rate
Bits Required
Bit Rate
300 - 4800
1
8 kbit/s
9600
2
16 kbit/s
19200
4
32 kbit/s
Over Sampling Mode
1. Expand the QV24S displays, as required, by clicking the relevant icons.
2. Set the Port Baud Rate to OVR Sample.
3. Drag and drop to the required E1 / T1 partner interface to create the data connection.