4RF Aprisa XE User Manual - page 82
Other manuals for Aprisa XE:
User Manual
Manual is about: 4RF Aprisa XE fixed point-to-point digital radio link
of
182
80 | Configuring the Terminal
Aprisa XE User Manual
Setting the RSSI Alarm Threshold
The threshold (in dB) at which the RSSI alarm activates can be set for each of the modulation types over
the adjustment range of -40 dBm to -110 dBm and the default values are as per the following screen shot.
The alarm threshold has a +1 dB hysteresis for the inactive state.
To set the RSSI alarm threshold:
Select Link or Local or Remote > Alarms > RSSI Thresholds
1. Enter the alarm threshold required for each of the modulation types.
2. Click Apply to apply changes or Reset to restore the previous configuration.