ABB i-bus KNX Product Manual - page 159
ABB i-bus
KNX
Commissioning
DLR/S 8.16.1M | 2CDC 507 100 D0202 157
3.3.8
Communication objects Staircase lighting function
The communication objects for the Staircase lighting function are to be enabled as additional
communication objects in the
Parameter window - Gx Functions
communication objects can be enabled simultaneously for the Staircase lighting function. The
communication objects appear as number 37 or 38.
No.
Function
Object name
Data type
Flags
37/38
Activate stairc. light./Status
Group 1
1 bit
DPT 1.003
C, R, W, T
This communication object can be enabled in the
Parameter window - Gx Functions
, page 86, as one of the two additional
communication objects.
This communication object is used for the activation/deactivation of the Staircase lighting function. On deactivation, the
lighting group
behaves like a “normal” lighting group of the DLR/S without the Staircase lighting function. The Staircase
lighting function can be reactivated if a telegram with the value 1 is received on the DLR/S via this object.
By setting the T flag, the communication object is actively sent after KNX bus voltage recovery.
Telegram value:
0 = Staircase lighting is deactivated
1 = Staircase lighting is activated and started
As long as the Staircase lighting function is activated, the Staircase lighting function is initiated by a telegram with the value 1
to one of both communication objects Switch or Switch/Status.
In the
Parameter window - Gx Staircase lighting
, page 94, it is possible to parameterize whether a switch, brightness value,
relative dimming or scene telegram interrupts the Staircase lighting function.
Furthermore, using this communication object, the status of Staircase lighting function can be made available on the KNX.
The status indicates whether the Staircase lighting function is activated or deactivated. It does not show that the staircase
lighting is running.
For further information, see:
Parameter window - Gx Staircase lighting
37/38
Staircase light. permanent ON
Group 1
1 bit
DPT 1.003
C, R, W, T
This communication object can be enabled in the
Parameter window - Gx Functions
, page 86, as one of the two additional
communication objects.
When the Staircase lighting function is activated, it allows permanent switch-
on of the lighting (also called “Service light”).
The staircase lighting time is set to permanent. Thus, the staircase lighting remains on until a telegram with the value 0 is
received via the communication object Staircase lighting permanent ON.
After KNX bus voltage recovery or download, the value of the communication object is set to 0 and a permanent on is not
active.
Telegram value:
0 = Permanent ON not active
1 = Permanent ON active
37/38
Warning staircase lighting
Group 1
1 bit
DPT 1.005
C, R, T
This communication object can be enabled in the
Parameter window - Gx Functions
, page 86, as one of the two additional
communication objects.
The value of the communication object is used to provide a warning before the staircase lighting time times out. The
communication object has the value 1 during the warning.
Should the Time for dimming down after light on (warning) be parameterized with Jump to, no warning is parameterized for
the staircase lighting. The communication object Warning staircase lighting remains unchanged with the value 0 (no
warning).
Should Forced operation be activated during the warning, the warning is reset, the communication object Warning staircase
lighting receives the value 0 and a telegram with the value 0 is sent on the KNX.